Applications
An operator can perform boring with a lathe, mill or machines specific to boring like jig bores, boring machines, or boring mills. Generally, lathe boring operations are less complex and offer more flexibility than boring with a mill.
Tools
Chatter, or a vibration, is common during the boring processes. However, it can cause a quality concern. When you minimize chatter, you get better productivity and surface finishes. Using boring bars and boring heads made from heavier materials can suppress chatter. Additionally, tooled steel, carbide, or tungsten tools will last longer than the less costly steel option.
Heads
It is recommended to use boring heads on a milling machine for larger holes with tight tolerances. The hole size range is set by the boring head. To adjust the hole size, you need to change the boring head size. This makes boring processes on mills more complicated, though more precise, than those on lathes.
Bars
Boring bars are used for both milling and lathe operations. Deeper holes need a longer bore than a shallow hole, so the length of the boring bit is critical. Boring bars can create any size hole if the bar fits in the hole. This feature makes boring bars a more flexible option than boring heads because you can achieve different size bores with the same bar.
Universal DeVlieg provides innovative and cost-cutting tool holding and high precision boring solutions to the machine tool industry, servicing a diversified customer base. The combination of over 32,000 active part numbers, over 10,000 standard items, and our technical support staff deliver design engineering expertise that is unmatched in the industry. To learn more about Universal DeVlieg, contact us This email address is being protected from spambots. You need JavaScript enabled to view it. or 877.308.3077 or visit at universaldevlieg.com.